EN
FR
DE
PT
ES
AR
BG
HR
CS
DA
FI
NL
EL
IT
JA
KO
NO
PL
RO
RU
SV
CA
TL
IW
LV
LT
SR
SK
SL
ET
MT
TH
FA
AF
MS
SW
GA
KA
Guide to quick loading of wall hanging fabric light boxes
Time : 2025-11-20
Wall cloth light boxes fast loading guide
Wall-Mounted Fabric Light Box
No-Tool Quick-Install Guide
Application Scenarios
No-Tool Quick-Install Guide
Application Scenarios
Quick-install principle
a. The aluminum frame has built-in silicone-groove sockets; the fabric graphic carries a sewn silicone bead. Push the bead into the groove—no screws, the graphic self-tensions.
b. Wall brackets are “hook-and-groove” or “magnetic / Velcro” pairs. The light-box back already carries the mating strip; just hook, press, done. Lift upwards to remove.
c. LEDs come pre-wired with a fast-lock connector. Plug the 24 V driver into the socket on the chassis and the box lights up.
a. The aluminum frame has built-in silicone-groove sockets; the fabric graphic carries a sewn silicone bead. Push the bead into the groove—no screws, the graphic self-tensions.
b. Wall brackets are “hook-and-groove” or “magnetic / Velcro” pairs. The light-box back already carries the mating strip; just hook, press, done. Lift upwards to remove.
c. LEDs come pre-wired with a fast-lock connector. Plug the 24 V driver into the socket on the chassis and the box lights up.
5-step no-tool installation
- Position: stick the supplied paper template to the wall to mark height and left/right points.
- Stick brackets: peel the backing from the wall hooks and press them onto the template marks (on tile, glass or metal they bond instantly; on painted drywall add a dot of the included no-nail glue and wait 1 h).
- Hang frame: align the hooks on the box with the wall brackets, hook the top first, then press the bottom until you hear a click.
- Plug in: feed the 24 V adapter cable through the cable notch and snap the fast-lock connector; tuck the cable into the rear groove.
- Fit graphic: starting at any corner, push the silicone bead into the groove along all four sides; the fabric stretches flat. Swap graphics by pulling the old one out and pressing the new one in—no need to take the frame off the wall.
Typical applications
- Retail stores: window displays, checkout back-wall, seasonal promotions that need frequent graphic changes.
- Exhibitions / conferences: booth back-wall, registration area, product-launch wall where set-up and tear-down times are short.
- Offices / real-estate: corridor culture wall, elevator lobby, project show-case that must look sharp day and night.
- Restaurants / chains: menu board above counter; splash-proof fabric can be machine-washed.
- Public institutions: hospital way-finding, school honor boards; magnetic system allows on-the-spot maintenance.Notes
- Frames up to 60 cm × 160 cm can be mounted with adhesive only; larger or overhead units should have two auxiliary screws for safety.
- Insert the silicone bead on all four sides at the same time to avoid “wavy” edges. In cold weather unroll the fabric 1 h before installation to remove creases.
- Keep the driver away from water; run the cable behind the frame, not through an exposed extension lead.
With this silicone-bead fabric system plus magnetic / hook brackets, you can truly install and swap graphics on a wall-mounted light box with zero tools, meeting any commercial space’s need for “light, fast and cost-effective” signage.