+86 13828765320
All Categories
tianlang seg lightbox 180 degree inline connector-0

Accessories

Home >  Products >  Accessories

TIANLANG Seg Lightbox 180 degree inline connector

A longer joining interface for projects that need alignment over a run rather than a single point.

Brand
TIANLANG
  • Overview
  • specification
  • Recommended Products
SEG display-frame hardware

In-Line Connector

Join compatible display-frame sections along a straight run with a long plate-style connector designed for a clear, repeatable assembly point.

Straight-run connectionDual end-lock layoutProject compatibility check
直通连接器 (6).webpReference image. Dimensions, material and profile compatibility are To be confirmed.

When a corner bracket is not enough

An in-line connector is selected when two frame sections need to continue in the same direction. Its elongated body creates a longer joining interface than a single corner fitting, making it a candidate for straight sections of an SEG light box, modular display wall, product stand or shelf-frame system.

The supplied image shows a flat, elongated plate with a locking mechanism near each end. The exact joining direction—end-to-end, side-by-side or to a base rail—must be checked against the mating extrusion drawing before quotation.

Read the product from the outside in

01 · BODY

Long joining plate

A broad, elongated surface is visible between the two end mechanisms.

02 · ENDS

Two lock areas

Locking elements are positioned at opposite ends of the part.

03 · FIT

Profile interface

The mating profile and engagement depth are To be confirmed.

04 · CHECK

Joint inspection

Confirm alignment and secure engagement before adding graphics or shelves.

Use the connector as a project control point

For a modular display system, the joint should be easy to identify during assembly, easy to inspect after locking and easy to specify during procurement. This connector can be considered for:

  • long SEG light-box runs where frame sections meet in a straight line;
  • modular display-wall extensions that require repeatable section joining;
  • shelf-frame alignment where the rail direction must remain continuous;
  • portable exhibition structures assembled from compatible profile members.

Do not approve by appearance alone

The image confirms the visible form, but not the engineering interface. Send the profile cross-section, mating member, target joint direction and intended load case for compatibility review.

This protects the buyer from ordering a visually similar part that does not engage the selected extrusion.

Lock the purchase specification before approval

Product name In-Line Connector
Product role Straight-run joining component for a compatible display-frame system
Visible form Elongated plate with two end locking areas
Joining direction Linear connection suggested by the form; final orientation To be confirmed
Lock points Two end mechanisms visible in the reference image
Overall length To be confirmed
Profile compatibility To be confirmed from the mating extrusion drawing or sample
Load contribution To be confirmed by the product specification and project calculation
Colour / finish White appearance shown; colour, coating and surface process To be confirmed
Pack quantity To be confirmed
Procurement boundary: All dimensions, ratings, compatibility, material grade, fastener details and production information not visible in the supplied image are To be confirmed before publication or purchase.

Verify the material and finish independently

The supplied reference shows a white rigid plate with rounded outer corners, formed end features and mechanical locking elements. The image does not establish whether the main plate is aluminium, coated steel, engineered polymer or another material.

Confirm the following with the manufacturer: base material, plate thickness, lock material, corrosion protection, coating adhesion, dimensional tolerance, release-cycle performance and any required inspection standard.

Pre-quotation checklist

Mating profileCross-section and slot geometry To be confirmed.
Joint directionEnd-to-end, side-by-side or base-rail use To be confirmed.
System loadGraphic, shelf and frame loads To be confirmed.
QuantityPer-frame quantity and spare ratio To be confirmed.

Match the connector to the frame use case

SEG light-box runs

Support a continuous frame concept where separate sections meet along a straight line.

Modular display walls

Help create a repeatable connection point for expandable exhibition or retail structures.

Shelf and stand frames

Use as a candidate joining part when rails or uprights need controlled alignment.

Why buyers may specify it

  • Longer interface than a single-point corner fitting.
  • Two visible end-lock zones support a defined inspection routine.
  • Suitable for a repeatable modular-kit discussion.
  • Can be reviewed as part of a complete frame, graphic and shelf package.

Answer the questions that affect ordering

What is an in-line connector used for?

It is used to join compatible display-frame sections along a straight run. The exact system application depends on the mating extrusion and project layout.

Is this a corner connector?

No. The elongated form suggests a linear joining role. A 90° corner application should use a confirmed angle bracket or corner connector instead.

Can it connect any SEG aluminium profile?

No universal compatibility should be assumed. Profile section, slot geometry, engagement depth and locking interface are To be confirmed.

What material is the connector made from?

The supplied image shows a white rigid component, but the material grade and manufacturing process are To be confirmed.

Can TIANLANG supply a complete display system?

Yes, the project can be reviewed as a system request covering compatible frame members, graphics, shelves, connectors and packaging. Final availability and configuration are To be confirmed.

What should be sent for a quotation?

Send the mating profile drawing or sample, desired joint direction, frame dimensions, quantity, application, expected load and delivery requirements.

Request a compatibility review

Share the extrusion section and intended display layout. TIANLANG can confirm whether this in-line connector is suitable, then review finish, quantity, packaging and production details.

Product: In-Line Connector
Brand: TIANLANG
Product category: SEG display-frame hardware

SEO keyword set

Primary: in-line connector, profile linking plate, extrusion straight connector
Supporting: SEG frame linear joint, modular display rail connector, aluminium frame joining plate, display wall connector, straight-run frame fitting

TIANLANG · In-Line Connector product detail draft

This page is a publish-ready content draft based on the supplied reference image. Fields marked “To be confirmed” require product or engineering verification before publication.

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
inquiry

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000